Captain Jon's Green Can Ammo Locking Hardware. Second Generation. Now Stainless Steel and Easier to install.
One Piece 1/2" Solid Stainless Steel Stud and 5/16" Threads (Made in the USA) (PatPending)
No thread locker compound needed.
Ammo Can Waterproofing stays intact.
The padlock stud is now a one piece design (post and thread together). Made from Solid (1/2") machined STAINLESS 303 STEEL. Made right here in the good old US of A. (Could of done it cheaper overseas but why??). The stud is secured with a nylon locknut that is Grade 8 Steel (zinc plated) thus eliminating the need for any thread locking compound. With the Nylon Locknut ( like the version with the thread locking compound) the bad guy can spin it all day long and the nut will not back off ( the bad guy nut will though). The watertight integrity of the can stays intact because we now include a Neoprene Washer that goes on the inside (or outside) . The large and small washers included are all steel and zinc plated for rust protection. The padlock stud will take up to a 1/4" lock shackle. Overkill, but once again why scrimp when security is your goal? Installation involves drilling one 11/32"or 5/16" hole, put on the neoprene washer, then the small metal washer, then the locknut and you are Done.
Will work on all Ammo can lids. Slotted lids ( slotted lids require two ), Big hole lids, and Small hole lids. For the small hole lids some minor fitting may be needed. Very Minor. The stud is now a true 1/2" so any filing will be very minor as the lid hole is a 1/2" too. If you have a slotted lid or a large hole lid then NO filing/fitting will be needed.
Kit includes: The Stainless Steel stud, One large washer, One small washer, One neoprene washer , One Grade 8 nylon locknut, and instructions. (*Lock and Can - not included.*) Learn More